Commercial & Industrial Flooring
Durable, safety-focused floor systems for warehouses, auto shops, retail, restaurants, and offices across the Sacramento area. Epoxy and urethane coatings installed around your schedule — including nights and weekends to keep downtime to a minimum.
Call (916) 759-6615 Request a Bid WalkWhat it is
Commercial floor coatings are industrial-grade resin systems — typically high-build epoxy with urethane topcoats — engineered for the specific abuse a facility dishes out: forklift traffic, chemical spills, thermal shock from hot washdowns, grease, and constant foot traffic. The system is matched to the use, because a warehouse aisle and a restaurant kitchen ask very different things of a floor.
A commercial coating does three jobs at once. It protects the concrete from the chemicals and impacts that would otherwise destroy it. It creates a seamless, cleanable surface — no grout lines, no tile edges, nowhere for grease and contaminants to hide. And it improves safety and operations: brighter floors reflect light, marked zones and line striping organize traffic, and anti-slip additives keep workers on their feet in wet areas.
We work with facility managers, business owners, and general contractors across the Sacramento area, from Rocklin and Roseville to Sacramento proper. Every project starts with an on-site walk-through and ends with a written scope — exactly what’s being coated, how it’s being prepped, what system is going down, and when the work happens. No vague quotes, no surprises mid-project.
Industries we serve
High-build epoxy systems that stand up to forklifts, pallet jacks, and racking. We can add traffic lane striping, pedestrian walkways, and safety markings right into the coating — organization that doesn’t wear off like tape.
Chemical-resistant systems built for oil, transmission fluid, brake cleaner, and antifreeze. Hot-tire pickup resistance and easy cleanup keep service bays looking professional instead of stained and beat up.
Decorative flake or polished-look systems that hold up under constant foot traffic and rolling displays. Bright, clean floors that make the merchandise — not the floor — the focus.
Seamless, sanitary surfaces with aggressive anti-slip texture and thermal-shock resistance for hot washdowns. Grease, food acids, and constant mopping are exactly what these systems are designed for.
Professional, low-maintenance floors that outlast carpet and vinyl tile — no replacement cycle, no stained tiles, just dust-mop and go. A clean floor sets the tone for the whole space.
Seamless, easy-to-sanitize surfaces with cove base integration options. Talk to us about your facility’s specific requirements and we’ll tell you honestly whether our systems fit.
Systems & options
Every facility gets a system chosen for its actual conditions — not a one-size-fits-all kit. The building blocks:
We don’t do food-processing plants requiring USDA/FDA-certified systems or facilities with specialized regulatory flooring requirements beyond our scope — if your project needs something we don’t do, we’ll say so during the bid walk rather than stretch into work we can’t stand behind.
Our process
We walk the facility with you: measure the areas, assess the slab condition, and — most importantly — learn how the space is used. What rolls on it, what spills on it, when it’s occupied, and what a failure would cost you.
You get a written proposal: exactly what’s being coated, the prep method, the full system specification (products and mil thickness), the schedule, and the price. If you need it broken out by phase or area for budgeting, we’ll do that.
We plan the work around your business — nights, weekends, phased sections, or shutdown windows. Fast-cure systems (like polyaspartic topcoats) are available when turnaround time is the critical factor.
Dust-controlled diamond grinding or shot blasting for large areas, crack and joint repair, degreasing, and moisture testing. Commercial slabs often have oil contamination and old coatings — we deal with both as part of prep, not as change orders.
Primer, build coats, broadcast, striping, and topcoats — applied in the specified sequence with proper cure times between coats. Phased areas are barricaded and clearly marked while work is in progress.
Final walk-through with you or your facilities contact: verify coverage, striping, and finish; hand over maintenance procedures for your cleaning crew; and document cure times before traffic resumes.
What’s included
We know a closed floor is lost revenue. Most commercial projects are scheduled in off-hours — nights and weekends — or phased so only part of the facility is down at a time. Fast-cure topcoat options can have areas back in service the next day in many cases. During the bid walk, tell us your constraints (operating hours, shift changes, delivery schedules) and we’ll build the schedule around them. What we won’t do is rush cure times to hit an unrealistic deadline — a floor put back in service too early is a floor that fails, and that costs everyone more.
Benefits
Anti-slip texture where it’s needed, high-visibility striping and markings, and brighter floors that improve visibility — all of which reduce slip, trip, and collision risk in the facility.
Seamless floors clean faster: no grout lines, no tile edges, no bare concrete absorbing spills. Cleaning crews spend less time, and the floor looks better between cleanings.
Systems specified for your actual exposures — oils, solvents, acids, forklift traffic, dropped tools — instead of a generic coating that fails at the first thing it wasn’t designed for.
A clean, marked, well-lit floor tells customers, inspectors, and employees that the operation is run properly. It’s the first thing anyone notices walking into a facility.
FAQ
Every project is priced from an on-site bid walk — square footage, slab condition, the system specification, striping and markings, and scheduling requirements all factor in. Larger open areas cost less per square foot than small cut-up spaces, and phased or off-hours work affects the schedule more than the price. You’ll get a written proposal with the full scope itemized, so you know exactly what you’re paying for.
Often, yes — by phasing the work so only part of the floor is down at a time, or by working nights and weekends. What we can’t do is coat a floor that has active traffic on it; the areas being worked need to be clear and stay clear through cure time. We’ll plan the phasing with you during the bid walk so the impact on operations is as small as possible.
It depends on the system and the area. Fast-cure systems can return to service the next day; traditional epoxy systems need a few days before heavy traffic. We’ll give you exact cure schedules per area before work starts, and we phase projects so you’re never down everywhere at once.
Usually, yes. Most of what makes an old slab look bad — oil staining, old paint, spalling, cracks — is addressable with proper prep: grinding, degreasing, repair, and the right primer. What we can’t fix is a slab that’s structurally failing or actively heaving. We assess all of this during the bid walk and tell you straight whether the slab is a candidate.
Yes — traffic lanes, pedestrian walkways, staging zones, and hazard markings are applied as part of the coating system, which makes them far more durable than tape or surface paint. Include them in the bid walk and they’ll be in the written scope.
Call to schedule a free on-site bid walk — we’ll assess your slab, learn how the space is used, and deliver a written scope and price. Nights and weekend scheduling available.
Call (916) 759-6615 Request a Bid Walk